LS ELECTRIC XGT Series - Performance Specifications

Chapter 2 Specifications
2-2
2.2 Performance Specifications
Specifications for system configuration of Rnet I/F module are as described below.
Please refer to the table below for system configuration.
1) XGL-RMEA/B Performance Specifications
Item
Specifications
Transmission Speed
1Mbps
(Rnet I/F modules common)
Max. Tx distance
Max. 750m
Connection Cable
Twisted pair shielded cable
- Standard: LIREV-AMESB 1Px22AWG (7/0.254):LS Cables
- Moving: CAN Bus Drag Chain, UL (1x2x0.34mm²): Helukable
Maximum stations
connected
Network
Master station 1[station no:0(fixed)] +
Slave station 31[station no:1~63]
= Max. 32 stations
(In case of 32 stations, you have to use repeater.)
- Only 1 master is available in the network.
Diagnostic function
XG5000 : High Speed Link Monitoring
System characteristic
Available detachment and attachment of slave
module during communication
Terminating resistor()
110(5%,1/2W)
Master/Slave operation
Only available as Master
XG5000
(HS Link)
Data Processing unit
Byte
Tx/Rx cycle
Selection among 20ms, 50ms, 100ms, 200ms,
500ms, 1s, 5s, 10s(default :200ms)
Max. Communication
points.
3,720bytes(slave 31stations * 120bytes/station)
Max. Block number
63(setting range : 0~62)
Max. points by Block
120 Byte(60words)
Max. Tx. Block number
32 Blocks
HS Link number
Max. 12
Specification
Max. module mounted
12 modules(Main Base + Extension Base)
Internal current
consumption
410mA
Weight
115g