LS ELECTRIC XGT Series - High-Speed Link Information

Chapter 5 High-speed Link Setting
5-17
5.6 High-speed Link Information
High-speed link swaps the data among master module and all slave modules.
It provides the flag of High-speed link operation status classified by individual station or total station.
It is useful when checking the reliability of Transmission/Reception data and finding cause of error. Flag
kinds and usage is as shown below.
Classification
Run-Link
Link-Trouble
Transmission
/Reception
status
Operation
mode
Error
High-speed
link status
Information type
All
Respectively
Flag name
(x=High-speed link number)
_HSxRLINK
_HSxLTRBL
_HSxTRX[n]
(n=0..63)
_HSxMOD[n]
(n=0..63)
_HSxERR[n]
(n=0..63)
_HSxSTATE[n]
(n=0..63)
Data type
Bit
Bit
Bit Array
Bit Array
Bit Array
Bit Array
Monitoring
Available
Available
Availability
Availability
Availability
Availability
Program use
Available
Availability
Availability
Availability
Availability
Availability
[Table] Function of High-speed link information
The way of selecting flag is as shown below.
Setting
sequence
XG-5000  Project window  Variable/Comment
How to use
Select View Flag.
Flag kind
Select among the System/High-speed link/P2P/PID.
Select list
All
It is showed the list of all High-speed links.
Parameter
number
It means High-speed link number. The selected number is
only displayed in List.
Block index
It is index number of High-speed link block.