Chapter 7. Usage of Various Functions
7-97
(3) JOG speed
(A) JOG High Speed
• JOG high speed operation has operation pattern as acceleration, constant speed, deceleration section. Therefore,
acceleration section and deceleration section is controlled by JOG acceleration/deceleration time.
• JOG high speed setting range : 5 ∼ 100,000(unit: 1pps)
(notices when setting the high speed : Bias speed ≤ Jog high speed ≤ Speed limit)
(B) JOG Low Speed
• JOG low speed operation has only constant speed operation pattern.
• JOG low speed setting range : 5∼ 100,000 (unit: 1pps)
2) Positioning parameter
Here describes Positioning parameter
To Next Page
Loading...
