Chapter 8. Communication Functions
8-38
8.1.9 LS inverter-dedicated protocol
1) Introduction
LS inverter dedicated protocol enables to build a 1:N (inverter as slave) system using LS-BUS (ASCII) protocol. This system can be built
easily with communication parameter settings in GMWIN. Up to 31 inverters can be used for each channel (channel 0, channel 1).
2) System configurations
(1) Configuration using channel 0
(2) Configuration using channel 1
LS INVERTER
G7L-CUEC GM7U
GM7U
LS INVERTER