LS Industrial Systems GLOFA GM7U Series - (2) Operation mode change switch status information

Appendix 2. Flag Lists
App2-6
System operation status information flag lists (continued)
Keyword Type
Data setting
range
Name Description
Representative
keyword
Restart mode
information
Restart type of program which is being executed in present.
(History)
Bit 0 Cold restart
Bit 1 Warm restart
_RST_TY BYTE
Bit 2 Hot restart
See the Section 4.5.1
_INIT_RUN BOOL -
During
initialization
An initialization program written by the user is being executed
_SCAN_MAX UNIT -
Maximum
scan time
(ms)
Maximum scan time is written during operation.
_SCAN_MIN UNIT -
Minimum
scan time
(ms)
Minimum scan time is written during operation.
_SCAN_CUR UNIT -
Present scan
time (ms)
Present scan time is continuously updated during operation.
_RTC_TIME[n]* BCD N: 0 to 7 Present time
BCD data of present time of RTC
(Example: 96-01-12-00-00-00-XX)
_RTC _TIME[0]: year, _RTC _TIME[1]: month, _RTC _TIME[2]:
day,
_RTC _TIME[3]: hour, _RTC _TIME[4]: minute, _RTC _TIME[5]:
second,
_RTC _TIME[6]: day of the week, _RTC _TIME[7]: unused
Day of the week: 0: Mon., 1: Tue., 2: Wed., 3:Thur., 4:Fri., 5:
Sat., 6:Sun.
_SYS_ERR UNIT Error code Error type See the Section 12.5 Error Code List
* Marked flags can be used while the RTC option module is in use.
6) System configuration status information Flag
(1) User program status information
Keyword Type
Data setting
range
Name Description
Representative
keyword
System S/W
configuration
information
GM1: 0, GM2: 1, (GM3: 2, GM4: 3, GM%: 4)
(FSM: 5,6), Twofold: 16
Bit 0
Basic parameter
error
Checks and indicates Basic parameter error
- - -
Bit 2 Program error Checks and indicates Program error
- - -
_DOMAN_ST BYTE
Bit 4
Communication
parameter error
Checks and indicates High speed link parameter error