LS Industrial Systems XGB Series - Chapter 4 System Configuration; General; Examples of System Configuration; Combination Network Configuration

To Next Page

To Previous Page

Chapter 4 System Configuration

4.1 General

4.1.1 General

XGB Fast Enet I/F module supports open Enet. It provides network configuration that is to connect LSIS and other company PLC, PC

on network.

4.2 Examples of System Configuration

4.2.1 Combination network configuration

[Figure 4-1] Combination network configuration

XGB Fast Enet I/F module provides system configuration by using main communication, Modbus TCP/IP, user define frame, HS link

communication connecting LSIS PLC with other LSIS PLC, PC on network.

4.2.2 Network configuration using XGB

[Figure 4-2] Network configuration using XGB

Communication between XGB Fast Enet I/F modules is available to perform 1:1 communication by using cross cable or 1:N

communication by connecting network. It provides data sending/receiving by using the dedicated service, Modbus TCP/IP, user define

frame and HS link communication.