LS Industrial Systems XGB Series - User Define Frame; TCP User Define Frame Client

Chapter 7 P2P Service
49
7.5 User define frame
7.5.1 TCP user define frame client
(1) Setting user define frame channel
[Fig. 7-18] Setting user define frame channel
(a) Set the channel driver to user define frame as the left screen of [Fig. 7-18].
(b) Select TCP/UCP as the right screen of [Fig. 7-18].
(2) Setting user fine frame port no.
[Fig. 7-19] Setting user fine frame port no
(a) Set operation mode ‘Client/Server’ to Client as the left screen of [Fig. 7-19].
(b) Select TCP/UDP as the right screen of [Fig. 7-19], input the desired port no. and the desired destination
IP address.