LS Industrial Systems XGB Series - Chapter 7 P2 P Service; P2 P Service Function Introduction; Client Model

Chapter 7 P2P Service
39
Chapter 7 P2P Service
7.1 P2P Service Function Introduction
7.1.1 Client model
P2P service provides a client function as below [Fig.7-1] Client/Server model.
It requests data Read/Write to server. When each block operation status is ON, it provides the function of connecting request
frame to the right channel and receiving response.
XGB Fast Enet I/F module communicates through Max.3 channels, each channel communicates by using different protocols.
[Fig. 7-1] Client/Server model
Server executes ① Request and ④ Confirmation.
[Fig. 7-2] Client/Server system configuration
XBL-EMTA is available to connect Max. 3 servers as [Fig 7-2].