Chapter 1 General
6
(6) Auto/10/100BASE-TX media service
(7) Various communication functions
(a) System connection by using public network
(b) LSIS protocol (XGT) and other company protocol (Modbus TCP/IP) (dedicated service)
(c) Simple client function for the communication between LSIS communication module and other company communication
module (XGT, Modbus TCP, user define P2P client function)
(d) Host enable table for Upper PC (MMI) and communication protection
(e) Dynamic Connection/Disconnection function by using P2P service
(8) Various diagnosis functions, module and network condition information
(a) CPU module condition
(b) Communication module condition
(c) Communication service (HS rink, main service, P2P) condition
(d) PING function to check the existence of other module
(e) Packet types and minute packet reception rate to LSIS communication module (it predicts network load)
(f) Diagnosis function for communication module by network
1.3.2 Designation
XGB Fast Enet I/F module designates as bellows.
Designation Description Remark
XBL-EMTA 10/100BASE-TX Over category 5, UTP cable
[Table 1-1] XBL-EMTA Designation
1.3.3 Max. modules can be installed
XGB series can be installed max. 2 communication modules.
Series Max. modules can be installed
XGB 2
[Table 1-2] Max. modules can be installed
1.3.4 Relevant software
Essential programming tools and other configuration software for using XGB Fast Enet I/F module is as followings.
Refer to followings and apply this suggestion for the right program and communication.
Designation Programming Tool Communication Setting Tool
XBL-EMTA XG5000 (more than Ver. 2.0 ) XG-PD (more than Ver. 2.0)
[Table 1-3] Relevant software
Remark
1) Download and usage of upper program is available at http://www.lsis.biz or this program installation CD’s can
be provided at the nearest shop.
2) Programming for XG5000 and XG-PD is available by using CPU module loader port and refer to cables from
the wiring diagram of relevant CPU modules.
To Next Page
Loading...