LS Industrial Systems XGB Series - Chapter 1 General; Before Reading this Manual; Before Using this Device; Relevant User Manuals

Chapter 1 General
5
Chapter 1 General
1.1 Before Reading This Manual
This manual includes specifications, installations and various services for Fast Ethernet Interface Module of XGB Ethernet PLC
(Hereafter, referred to as XGB Fast Enet I/F module,100Mbps). Ethernet is one of technical standards of IEEE. It provides HS data
communication on the base of CSMA/CD network.
XGB Fast Enet I/F module is an interface module for data communication between PC devices by using the electrical media
(10/100BASE-TX, 100BASE-FX).
1.2 Before Using This Device
1.2.1 Relevant user manuals
Refer to below user manuals for achieving program.
(1) XGT PLC Instruction and Programming manual
(2) XG5000 manual
(3) XGB series manual
1.2.2 Version Information
XGB series Fast Enet I/F module (XBL-EMTA) is suitable to following versions.
(1) XG5000 programming tool: above Ver 2.0
(2) XG-PD: above Ver 2.0
(3) XGB CPU: above Ver 1.4
1.3 Characteristics
XGB Fast Enet I/F module provides its services for ARP, ICMP, TCP/IP and UDP/IP protocol and includes following characteristics.
1.3.1 XGB Fast Ethernet I/F module characteristics
(1) Ethernet II, IEEE 802.3 standard functions
(2) HS link function for HS data communication between LSIS modules
(a) Communication dedicated parameter setting program (XG-PD)
(b) Transmission Max. 32 blocks x 200 words, Reception, Max. 64 block x 200 words, Transmission-Reception Max. 64
blocks x 200 words)
(3) HS link and communication is available with Max. 4 modules (Dedicated communication + P2P communication)
(4) Loader service by Enet (XG5000): (Dedicated TCP/IP PORT: 2002 assignment)
(5) Connection to other system is available by using P2P communication and XG-PD
(Variable READ/WRITE services (Dynamic Connection function))