LS Industrial Systems XGB Series - Network Configuration Using XGB and MMI; Network Configuration between LSIS Modules; Network Configuration Using XGB and Other LSIS PLC

To Next Page

To Previous Page

Chapter 4 System Configuration

4.2.3 Network configuration using XGB and MMI

[Figure 4-3] Network configuration using XGB and MMI

Communication between XGB Fast Enet I/F module and PC is available to perform 1:1 communication by using cross cable or 1:N

communication by connecting network. It provides connecting and data sending/receiving by using XG5000, XG-PD or MMI on PC.

XG5000, XG-PD do download/upload parameter and program and furthermore these provide data sending/receiving by using the

dedicated service, Modbus TCP/IP, user define frame.

4.2.4 Network configuration between LSIS modules

[Figure 4-4] Network configuration between LSIS modules

XGB Fast Enet I/F module and Enet I/F of XGT series provide system configuration. 1:1 communication is available using cross cable

or 1:N communication is available by connecting network. It provides data sending/receiving by using main service, Modbus TCP/IP,

user define frame.

4.2.5 Network configuration using XGB and other LSIS PLC

[Figure 4-5] Network configuration using XGB and other LSIS PLC

XGB Fast Enet I/F module provides communication with other LSIS PLC, HMI, MMI. . 1:1 communication is available using cross

cable or 1:N communication is available by connecting network. To communicate, protocols between PLCs should be same.