LS Industrial Systems XGB Series - Enable Link

Chapter 7 P2P Service
45
[Fig. 7-13] Finishing setting P2P block variables and setting block
(d) Write read area/save area of XGB CPU as the left screen of [Fig. 7-13].
(e) Clicking enter key finishes setting block as [Fig. 8-11].
7.2.2 Enable link
(1) P2P enable setting screen
[Fig. 7-14] P2P enable setting screen
(a) After setting P2P function, P2P enable should be set to start P2P service.
(b) Connect XG-PD as the left screen of [Fig. 7-14], Select enable link on Online menu.
(c) It shows enable link screen as the right screen of [Fig. 7-14].