Chapter 7 P2P Service
44
(10) Setting number of P2P block variables
[Fig. 7-11] Setting number of P2P block variables
(a) Set number of variables as [Fig. 7-11].
(b) XGT client selects SINGLE/CONTINUOUS.
(c) Modbus TCP client is fixed as 1.
(d) User define frame can not select types.
(11) Setting P2P block variables
[Fig. 7-12] Setting P2P block variables
(a) Select the variable as the left screen of [Fig. 7-12]. Double-click it.
(b) Double-clicking shows the screen of setting variables as the right screen of [Fig. 7-12].
(c) Write can be 1~4 variables by the setting numbers of variables.
To Next Page
Loading...