Chapter 7 P2P Service
43
(8) Setting P2P block driver
[Fig. 7-9] Setting P2P block function and operation condition
(a) Select P2P function as the left screen of [Fig. 7-9]. Function can be selected by the assigned channel driver.
(b) Client selects READ/WRITE.
(c) Modbus TCP client selects READ/WRITE.
(d) User define frame selects SEND/RECEIVE.
(e) Write operation condition as the right screen of [Fig. 7-9]. Operation condition is an internal device of XGB CPU
(9) Setting P2P block type
[Fig 7-10] Setting P2P block type and data type
(a) Select the type as the left screen of [Fig. 7-10]. Function can be selected by the assigned channel driver.
(b) XGT client selects SINGLE/CONTINOUS.
(c) Modbus TCP client selects SINGLE/CONTINOUS.
(d) User define frame can not select types.
(e) Write operation condition as the left screen of [Fig. 7-10]. Operation condition is an internal device of XGB CPU
To Next Page
Loading...