LS Industrial Systems XGB Series - Page 51

Chapter 7 P2P Service
50
(3) Setting user define frame group addition
[Fig. 7-20] Setting user define frame group addition
(a) Setting user define frame group addition of [Fig. 7-20]
(b) Select user define frame group addition as the left screen of [Fig. 7-20], click right button of mouse. It shows pop-up
menu ‘Add Group’. Then, click it again.
(4) Select user define frame group name and frame type
[Fig. 7-21] Select user define frame group name and frame type
(a) Select user define frame group name and frame type of [Fig. 7-21]
(b) Select frame type ‘Transmission’ on Group Edit as the left screen of [Fig. 7-21].