Chapter 9 Remote Communication Control
75
[Fig. 9-5] XG-PD remote 2
Other parts are same as the step of remote 1. Only the step of remote 2 explains.
(1) Network type setting
(a) Select XGT FEnet by network remote 2.
(b) Network type of remote 1 and remote 2 have no relevance.
(2) Slot No. setting
(a) In Network 2 , the position of module which installed in remote 2 station PLC(PLC B).
(b) The position shall be inputted as Slot No.
(3) The status of finishing remote 1 is same as the logical connection status with local connection by moving RS-232C. User
can use all function of online menu.
To Next Page
Loading...