3 -6
▶If you use the hazard warning lights for a long time, it may cause a increase of
electrical consumption. Do not use the hazard warning lights for a long time.
Notice
(6) Hazard warning light switch
① Europe / Korea version
z This is used to warn other vehicles in case of
emergency status. If you press the upper side
(symbol part) of the switch, all turn signal lights
and indicators shall blink.
Hazard warning light switch
② U.S.A version
z By turning the light switch ① once to the
clockwise, all turn signal lights are blinked.
z When turning the light switch to “Low beam”
position, the hazard warning light is automatically
turned on.
▶ If you use the hazard warning lights for a long time, it may cause a increase of
electrical consumption. Do not use the hazard warning lights for a long time.
Notice
Light switch
①
②
▶ Set the engine speed over 1500 rev/min for stability of hydraulic system while
driving or working.
Notice
(7) Throttle lever
z It is used to set or change the engine speed.
Low speed : Pull It backward
High speed : Push it forward.
Throttle lever
To Next Page
Loading...
