LOADER INSTALLATION
▶ Install Grille Guard ▶ Hose Guide
(1) Grille - 1EA (4) Hose Guide - 1EA
(2) Hex. Bolt M12-1.75P 40L - 4EA (5) Hex. Bolt M14-2.0P 30L - 1EA
(3) Washer Spring M12 - 4EA (6) Washer Plain M14 - 1EA
(7) Washer Spring M14 - 1EA
(8) Hex Nut M14-2.0P - 1EA
Verify that all mounting kit hardware has been torqued as specified before installing loader.
▶ Identify hardware size and grade.
▶ Refer to Torque Chart, page 24 and find correct torque for your hardware size and grade.
▶ Torque hardware to this specification unless otherwise specfied.
▶ IMPORTANT NOTE: To keep mounting kit hardware from loosening during loader operation, hardware
must be torque to specifications.
- 44 -
To Next Page
Loading...
