LS tractor MT122 User Manual

4 -1
▶ Check each part before starting the
engine.
▶ Check if there’s anyone close to the
tractor before starting.
▶ Place all the levers and switches in
“NEUTRAL” or “OFF” position.
4. Operation and Work
4-1. Engine start and stop
(1) Engine start
Caution
3. Place the PTO
select lever on “Rear
PTO” position and
HST pedal in
NEUTRAL position.
HST type
Brake pedal
HST pedals
Throttle lever
Range gear
shift lever
PTO select
lever
PTO switch
7. Check if engine oil pressure
indicator and battery charging
indicator are OFF. If not go OFF,
stop the engine and check the
problem.
8. Run engine a few
minutes to allow
engine oil and
transmission oil to
warm up.
6. Turn key switch to start
position. As soon as the
engine starts, release
key switch to ON
position.
2. Place the range gear shift lever
in NEUTRAL, and PTO switch
in OFF.
1. Sit in the driver’s seat
and apply the parking
brake lever.
4. . Turn key switch to
ON and check if the
battery charging
indicator and engine
oil pressure indicator
are ON.
5. Turn the key switch
to “Preheat” for
about 4 seconds
with checking if the
pre-heating indicator
is ON.

LS tractor MT122 Specifications

General

Brand	LS tractor
Model	MT122
Category	Tractor
Language	English