LS XR4046 - 4-5. Working in Hazardous Area ··························· ·······4-28; Driving Speed

4 -29
4-6. Driving speed
z The driving speed of tractor or the revolution speed of PTO depends on the work, tire and ground
condition. For safety, operate the tractor at suitable speed.
z Table of driving speed (unit : Km/h -> Mile/h)
Note) Engine rated speed : 2600 rev/min, Dynamic load radius : 578mm (22.8 in.)
XR4040 / XR4046
① Standard speed (creeper off)
Range
gear
1234
Main
gear
1234123412341234
Forward 1.12 1.33 1.56 2.09 2.53 3.00 3.53 4.73 5.60 6.64 7.81 10.5 14.5 17.2 20.2 27.1
(mph) (0.70) (0.82) (0.97) (1.30) (1.57) (1.87) (2.19) (2.94) (3.48) (4.13) (4.85) (6.50) (9.01) (10.7) (12.6) (16.8)
Reverse 1.02 1.20 1.42 1.90 2.30 2.73 3.20 4.29 5.08 6.03 7.08 9.49 13.2 15.6 18.3 24.6
(mph) (0.63) (0.75) (0.88) (1.18) (1.43) (1.69) (1.99) (2.67) (3.16) (3.75) (4.40) (5.90) (8.17) (9.69) (11.4) (15.3)
Range
gear
1234
Main
gear
1234123412341234
Forward 0.18 0.22 0.25 0.34 0.41 0.49 0.58 0.77 0.91 1.08 1.27 1.71 2.36 2.80 3.30 4.41
(mph) (0.11) (0.13) (0.16) (0.21) (0.26) (0.30) (0.36) (0.48) (0.57) (0.67) (0.79) (1.06) (1.47) (1.74) (2.05) (2.74)
Reverse 0.99 1.18 1.38 1.86 2.25 2.67 3.13 4.20 4.97 5.90 6.93 9.28 12.9 15.3 17.9 24.0
(mph) (0.62) (0.73) (0.86) (1.15) (1.40) (1.66) (1.95) (2.61) (3.09) (3.66) (4.31) (5.77) (8.00) (9.5) (11.1) (14.9)
② Optional speed (creeper on)
XR4040 / XR4046
Note) Engine rated speed : 2600 rev/min, Dynamic load radius : 578mm (22.8 in.)
Mechanical Type