3 -15
▶ DO NOT ride your foot on the clutch pedal while driving.
▶ As the start safety switch is installed for the operator’s safety, if you don’t press the
pedal fully, it does not start.
Caution
(16) Clutch pedal (Mechanical)
z This is used to engage or disengage the main
transmission clutch for starting engine and
shifting transmission gear.
z Depress the clutch pedal quickly and fully and
release it slowly.
z If the PTO mode switch is placed on MANUAL,
the PTO shaft will NOT stop, if the switch is
placed on AUTO, the PTO shaft will stop, when
pushing down on clutch pedal.
Clutch pedal
(17) Brake pedals
z The brake pedals of your tractor can be operated
independently after disconnecting the brake
pedal lock pin. The left/right brake pedals
transmit braking force on each wheel.
z When stopping the tractor, press both brake
pedals together.
z To reduce the turning radius in the work field,
remove the brake pedal lock pin, and press only
the left/right pedal firmly.
z DO NOT press the one side brake pedal while
the differential lock is engaged. It may cause
damage or failure of the axles.
Caution
▶When driving on the road,
engage the left/right brake
pedal by the lock pin.
- If pressing one side of brake
when running, the tractor may
turnover.
▶ While driving, do not ride
brake and clutch pedal.
Brake pedal lock pin
Brake pedals
Brake pedal
lock pin
Brake pedals
MEC
HST
To Next Page
Loading...
