LS XR4046 - How to Drive and How to Stop; How to Drive

4 -4
1. Pull position control lever backward to lift the
implement after starting engine.
2. Press clutch pedal fully and place all the
transmission gear levers (main, range, shuttle
lever) on desired position.
3. Pressing brake pedals, and release parking
brake lever.
4. Release clutch pedal slowly with pressing
throttle pedal slowly.
4-2. How to drive and how to stop
▶Release the clutch pedal slowly. If not, the transmission gear life shall be reduced
and it may cause a sudden start.
Notice
(1) How to drive
Mechanical type
Position control lever
Main gear shift lever
Range gear shift lever
Parking brake lever
Throttle pedal
Brake pedals
Shuttle lever
Clutch pedal
Throttle lever
Cabin
Position control lever
Main gear shift lever
Range gear shift lever
Parking brake lever
Roll-bar