3 -16
Creeper gear lever
Creeper range
Standard
▶As the revolution force of wheel axle is very high when working in creeper speed
range, the machine may not stop even if you press the brake pedals.
In this case, press the clutch pedal to cut off the power and operate the brake
pedals.
Caution
(19) Creeper gear lever (MEC, if
fitted)
z It is used to work with very low driving speed.
When doing general work or driving on road,
push the creeper lever downward for standard
speed.
z Move the lever upward for creeper speed.
z For driving speed, refer to the section 4-5,
“Driving speed”.
(18) HST forward/reverse pedal
(HST type)
z Press the HST forward pedal slowly in order to
move forward and if release the pedal, it returns
back to the NEUTRAL position, and tractor stops.
z The HST reverse pedal is as same as the HST
forward pedal operation.
warning
▶Press the brake pedal to prevent stopping distance from being extended when
driving in high speed .
▶DO NOT operate the pedal hastily. It may cause a shock to you.
HST
reverse
pedal
HST
forward
pedal
To Next Page
Loading...
