4 -22
(7) Adjusting Wheel tracks and
tire replacement
z If the front wheel track is adjusted, check the
clearance between tires and tractor body case
by case. If necessary, the steering angle must
be adjusted.
(See page 4-26 in this manual.)
z When adjusting rear wheel track, check the
radial and lateral clearance between rear tire
and tractor chassis as below.
- A : 60mm (2.4 in) (Minimum)
- B : 50mm (2.0 in) (Minimum)
z Depending on rim or disk type, the front and
rear wheel tracks may vary.
“A”
“B”
① Front wheel track
- 9.5-16 with rim & disk (W8x16)
② Rear wheel track
- 13.6-24 with rim & disk (W10x24)
▶ When adjusting the wheel track, pay attention to the direction of tire lugs.
▶ if it shows “/\” shape when looked behind, it is correct.
Notice
To Next Page
Loading...
