LS XR4046 - Turn Signal Light Switch; Light Switch

3 -7
Turn signal
light switch
(3) Turn signal light switch
z This switch is used to give information to other
vehicles when turning to the left or right.
z If turning the switch to clockwise, the right turn
signal lights are blinking.
-If turning the switch to counter-clockwise, the
left turn signal lights are blinking.
▶ When changing direction
during running on the road,
operate the turn signal lights to
inform other vehicles of your
direction.
Left turn
Right turn
(4) Light switch
z OFF - Instrument panel and lights OFF
- Instrument light and side lights ON
- Instrument light, side lights, head lights
(low beam) ON
- Instrument light, side lights, head lights
(high beam) ON
▶When passing with other vehicles in the opposite lane at night, turn the headlights
to low beam not to disturb on coming cars.
Light switch
Caution
Caution
(2) Key switch
z OFF - power off (engine stop)
z ON/Preheat - power on & automatic glow
z START - engine start
▶ Because the safety switch for start is engaged, start the tractor after pressing
clutch pedal.
▶ If the tractor is not in use, the ignition key should be removed.
Key switch
Caution
OFF
ON/Preheat
Start