EasyManua.ls Logo

LS XR4046 - Page 139

Default Icon
158 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 -32
< Do not charge the attached battery>
< when connecting the charger >
Notices in charging the battery using separate charger
z As the battery fluid makes poisonous gas which can explode during the charging, comply with the
following instructions.
1. Detach battery from the tractor.
2. Wait until the battery is warmed to room
temperature.
3. Connect the cable of charger to the (+), (-) terminal
of the battery correctly.
- Connect (+) charger cable to (+) battery terminal.
: Red color
- Connect (–) charger cable to (–) battery terminal.
: Black color
4. Plug in charger cord.
5. Charge battery with a “SLOW CHARGE”.
6. Check the charging current and temperature of
electrolyte during the charging.
7. Unplug charge cord and remove charger cables.
8. Attach battery to the tractor.
Put on eye protection and globes to protect human body from poisonous sulfuric
acid before handling the battery .
Always remove grounded (-) battery clamp first and assemble it last. If not, It can
cause explosion by spark.
Keep all flames and sparks away and DO NOT smoke while you charge battery.
Detach battery from the tractor before charging. DO NOT charge directly while the
battery is attached to the tractor.
Turn off or unplug the charger cord, before connecting or disconnecting the charger
cable to or from the battery
Charge the battery in an area with good ventilation.
Do not charge the frozen battery.
Use the rated 12V-5A charger.
Never check battery charge by placing a metal object across the terminals.
Caution

Table of Contents

Related product manuals