EasyManua.ls Logo

LS XR4046 - Page 142

Default Icon
158 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 -35
System Faults Possible causes Solutions
Engine
Engine stops at low
rpm.
▲ Fault of injection pump
▲ Valve gap is not correct
▲ Poor nozzle pressure
▲ Repair
▲ Adjust the gap
▲ Repair
Engine overheat
▲ Lack of engine coolant
▲ Bad fan belt tension or broken
▲ Dirt attached to the radiator
▲ Supplement
▲ Adjust belt tension or
replace
▲ Clean
The color of exhausted
smoke is white.
▲ Air cleaner clogged
▲ Engine oil exceeded
▲ Lack of fuel supply
▲ Wash element
▲ Adjust in proper level
▲ Repair
The color of exhausted
smoke is black.
▲ Bad quality of fuel
▲ Oversupply of fuel
▲ Fault of nozzle
▲ Use good quality fuel
▲ Repair
▲ Repair
Engine power is low.
▲ Injection nozzle clogged
▲ Carbon piled to valve seat
▲ Bad adjustment of valve gap
▲ Bad injection timing
▲ Lack of fuel supply
▲ Air cleaner clogged
▲ Repair
▲ Repair
▲ Repair
▲ Repair
▲ Check fuel system
▲ Clean or replace
Engine oil pressure
indicator is ON during
operation.
▲ Lack of engine oil
▲ Low viscosity of engine oil
▲ Warning light switch error
▲ Fault of oil pump
▲ Oil filter element is clogged
▲ Supplement
▲ Replace the proper oil
viscosity
▲ Replace
▲ Repair
▲ Replace element
Battery charging
indicator is ON during
operation
▲ Abnormal wiring
▲ Fault of alternator
▲ Fault of battery
▲
Bad fan belt tension or broken
▲ Check battery terminals and
ground, repair
▲ Repair or replace
▲ Replace
▲
Adjust belt tension or replace
Clutch
Clutch is slipped.
▲ Wrong clutch pedal play
▲ Friction lining worn or broken
▲ Adjust
▲ Replace
Clutch does not cut-off.
▲ Lining damaged
▲ Wrong clutch pedal play
▲ Repair or replace
▲ Adjust

Table of Contents