3 -25
(3) Four wheel drive lever (4WD)
z This lever is used to engage/disengage the four
wheel drive (4WD). Push it downward for
engaging 4WD.
z Before operating the 4WD lever, press the clutch
pedal and stop the tractor completely.
z 4WD is very effective in the following cases.
- When increasing the towing power for heavy
work.
- In case of working in sandy soil.
- To prevent tractor from spinning in wet land.
Four wheel
drive lever
GSP lever
(4) GSP lever (if fitted)
z If you pull the lever backward, the ground speed
PTO (GSP) is engaged.
z If you push the lever forward fully, the ground
speed PTO (GSP) is disengaged and
independent PTO is available.
z Before operating the GSP lever, press a clutch
pedal and stop the tractor completely.
2WD
4WD
GSP
Independent PTO
(5) Middle PTO lever (if fitted)
z Pull the middle PTO lever up to engage the
middle PTO gear.
z The middle PTO shaft rotates counter-clock wise
(CCW) when looking at middle PTO shaft end.
z Speed : 2000 rev/min when engine rotates 2563
rev/min.
Middle PTO lever
ON
To Next Page
Loading...
