3 -37
② Roll-bar type
z These levers are used to operate the hydraulic cylinder and/or motor of the implement attached to
the tractor.
z Pull the remote control lever backward, and the hydraulic pressure can be delivered to the left-
hand coupler of the related lever and right-hand coupler shall be connected to the drain.
z Each lever of the remote control valve can be operated respectively, and when operating the levers
at the same time, the one received less pressure begins to start first.
z After connecting and preliminary operating the hydraulic equipment, check again transmission oil
level of the tractor.
When pulling / When pushing
Roll-bar type
Lever②
Lever①
Push
Pull
lever②
lever①
lever③
(if fitted)
Lever③
(if fitted)
To Next Page
Loading...
