4 -13
Adjustment range
Lift rod
430~540 mm
(16.9 ~ 21.3in)
Upper link
480~ 700 mm
(18.9 ~ 27.6in)
① Adjustment of Lift rod and Upper link
z Do not adjust the lift rod and upper link over the
described range as below.
z For lift rod (RH)
- Lift up the lift rod handle and turn left or right to
adjust the length.
- Lock the lift rod handle to the lower part after
adjusting.
z For upper link
- Lift up the lock spring to release the handle and
turn the upper link by using the handle.
- Apply the lock spring after adjusting.
Lift rod (LH)
Lift rod (RH)
Upper link
Lift rod handle
② Adjustment of stabilizer’s length
ⓐ Check chain type
z Turn the knob(2) to adjust the length of the
stabilizer(1). After the adjustment , let it tightened
firmly by fixing nut(1).
▶When adjusting the stabilizer’s
length, adjust the implement’s
swinging clearance to be
20~40mm (0.79~1.57 in.) left
and right.
Notice
①
③
②
To Next Page
Loading...
