Chapter 4. System Configuration
Goto screen after boot up
When setting [Auto Goto Screen], XGT Panel is rebooted. Or when downloading the
edit data is completed, the screen automatically shows up. If you cancel this setting, the
user should press ‘Start’ button in order to move to the screen.
When starting screen, screen shows promptly without showing progress bar because it
doesn’t caching the image in advance. However, if you select this option, first screen
shows slowly. Especially, if there are many animation objects in screen, it may take several
seconds based on image. But fast screen switching is available since second screen
switching.
Mouse cursor doesn’t show after screen switching
You can set whether you use buzzer through [Buzzer On/Off] button.
The menu bar basically provided to go out from monitoring screen to the waiting screen
doesn’t show. In this case, if you want to go out to the waiting screen, you have to use
the special switch to close the monitoring screen.
To Next Page
Loading...