4. Error Code List
49
There's no file to
download.
The version information list to update is
empty. Check the module folder newly
designated at XP-Builder and if there is
no error, download XGT Panel module
and try update again. If this symptom is
repeated, contact Customer Service
Center.
Downloaded file is
not Module to
download.
The wrong file which is not in the new
module list of XGT Panel is downloaded.
Try update of XGT Panel again. If this
symptom is repeated, contact Customer
Service Center.
Not enough space in
flash memory.
The space to copy new module in XGT
Panel is not enough. After deleting the
unnecessary file or backing up the
previous file to the movable storage
equipment, try update again. If this
symptom is repeated after deleting,
contact Customer Service Center.
Failed to Copy
module ~.dll
The new module is not installed because
of XGT Panel’s error. After rebooting the
device, touch
\\FlashDisk\LSISProduct\Update.exe and
set the device as update mode. Then
update again. If this symptom is
repeated, contact Customer Service
Center.
Failed to Start
Engine. Please
update engine
again.
To reboot the engine is not available
because of wrong file which is developed
by downloading wrong module or
communication error. Touch
\\FlashDisk\LSISProduct\Update.exe and
set the device as update mode. Then
update again. If this symptom is
repeated, contact Customer Service
Center.
Failed to Write Data
to Module version
File.
It is failed to record the version
information during update of XGT Panel.
If this symptom is repeated, contact
Customer Service Center.
There's no
downloaded file.
To reboot the engine is not available
because of wrong file which is developed
by downloading wrong module or
communication error. Touch
\\FlashDisk\LSISProduct\Update.exe and
set the device as update mode. Then
update again. If this symptom is
repeated, contact Customer Service
Center.