LSIS XP Series Troubleshooting Manual

4. Error Code List
48
Object
Error code
Occurrence
location
Error message
Reason and measure
Type
Address
XGT Panel
booting
0x28
0x05
XGT Panel
Failed to rename
UpdateNew.exe
In the present XGT Panel the new
updated XGT Panel software’s name
cannot be changed. After rebooting the
XGT Panel, update again. When
rebooting, if you can’t start engine,
delete
\\FlashDisk\LSISProduct\UpdateNew.exe
in the XGT Panel. Then if you touch
Update.exe and execute the XGT Panel,
it can be update mode. Try update again.
If this symptom is repeated, contact
Customer Service Center
0x06
XGT Panel
Failed to Delete
Update.exe.
The new module is downloaded by the
XGT Panel update but the previous
module is not deleted. Reboot the
device. If the XGT Panel software is not
started normally, touch
\\FlashDisk\LSISProduct\Update.exe in
the XGT Panel. At this time, if XGT is set
as update mode, update again. If this
symptom is repeated, contact Customer
Service Center.
Communicatio
n between
other XP
Builder-
XGT Panel
0x29
0x30
XGT Panel
Failed to modify
password file.
The device connection password can’t
be modified because of error of Flash
Disk of XGT Panel. Reboot the device. If
this symptom is repeated, contact
Customer Service Center.
0x31
XGT Panel
Password-related
command
transmission
payload error
It failed to set and modify password
because of communication status error.
If this symptom is repeated, contact
Customer Service Center.
0x32
XGT Panel
There is no XGT
Panel connection
setting file.
The connection setting file of XGT Panel
can’t be found.
0x33
XGT Panel
Modified content
can’t be saved in
the XGT Panel
connection setting
file.
The modified information can’t be saved
at the connection setting file of XGT
Panel. If this symptom is repeated,
contact Customer Service Center.
0x34
XGT Panel
Failed to set the
time
The XGT Panel’s time can’t be set. If this
symptom is repeated, contact Customer
Service Center.
XGT panel
S/W update
0x30
0x21
XGT Panel/
XP-Builder
Failed to Create
Initialized Module
Version File.
Because the each module version
information can’t be read because of
XGT Panel’s error, it failed to initialize. If
this symptom is repeated, contact
Customer Service Center.
0x22
XGT Panel/
XP-Builder
Module version file
size is invalid.
The each module version information
can’t be read because of XGT Panel’s
error. If this symptom is repeated,
contact Customer Service Center.
0x23
XGT Panel/
XP-Builder
Can't Read module
version file.
The each module version information
can’t be read because of XGT Panel’s
error. If this symptom is repeated,
contact Customer Service Center.

LSIS XP Series Specifications

General

Brand	LSIS
Model	XP Series
Category	Touch Panel
Language	English