EasyManuals Logo

Lucent Technologies MERLIN LEGEND Release 6.1 Network Reference

Lucent Technologies MERLIN LEGEND Release 6.1
360 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
MERLIN LEGEND Communications System Release 6.1
Network Reference
555-661-150
Issue 1
August 1998
Prior Releases: Features and Enhancements
Page xxiRelease 6.0 Enhancements (February, 1998)
Voice Mail and Auto Attendant. Networked systems should have their
own local voice mail and/or auto attendant applications as well as their own
external alerts and Music On Hold sources. However, a single auto
attendant can transfer calls throughout the network. It can answer only
those calls that arrive on the PSTN facilities of the system where it is
connected.
Although many features are available using tie trunks for network connectivity,
PRI tandem trunks provide greatly enhanced features and faster call setup. For
this reason, PRI is recommended over tie functionality in private networks.
Group Calling Enhancements 0
Release 6.0 and later systems include Group Calling features that enhance group
calling operations.
Queue Control 0
The system manager can control the maximum number of calls allowed in the
primary calling group queue for calls that arrive on certain facilities often assigned
to calling groups. When the number of the calls in queue reaches the
programmed maximum, subsequent callers receive a busy signal.
Queue control applies to calls received on the following types of facilities:
DID (Direct Inward Dialing)
PRI facilities programmed for dial-plan routing
All calls transferred from a VMI (voice messaging interface) port
Dial-in Tie
Queue control also applies to internal calls to a calling group and calls to a calling
group through the QCC.
Internal calls that dial
#0
or
#800
and are directed to a calling group administered
as Position-Busy Backup are eligible for queue control. Calls that come in on a
trunk assigned to the Queued Call Console (QCC) are not eligible for queue
control if the call is directed to a calling group designated as Position-Busy
Backup.
Remote-access calls to a calling group, coverage calls directed to a calling group,
calls directed to calling group through QCC Position-Busy backup, and all other
outside calls are not eligible for queue control.

Table of Contents

Other manuals for Lucent Technologies MERLIN LEGEND Release 6.1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lucent Technologies MERLIN LEGEND Release 6.1 and is the answer not in the manual?

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General IconGeneral
BrandLucent Technologies
ModelMERLIN LEGEND Release 6.1
CategoryConference System
LanguageEnglish

Related product manuals