MERLIN LEGEND Communications System Release 6.1
Network Reference
555-661-150
Issue 1
August 1998
Network Management
Page 5-31Display Preferences for Intersystem Calls
5
Display Preferences
for Intersystem Calls 5
Use this procedure to specify display preferences on MLX display telephones, for
incoming PSTN calls or non-local dial plan calls that arrive on PRI tandem trunks.
Non-local dial plan calls that arrive on private networked tie or T1 trunks are not
affected; such calls display on the recipient’s telephone as outside calls. For
details about the display content, see the intersystem calling examples included in
Chapter 2, “Call-Handling Scenarios
.”
The factory setting specifies display of the calling number.
Valid Entries
Calling Name, Calling Number, Both
Task List: Display Preferences
for Intersystem Calls 5
o Obtain Non-Local UDP Administration Form in the Installation
Specification, Display Preferences.
o Open the System Programming menu from the console or a PC with SPM.
o Program the change(s), following the instructions below or those for
“Display Preference” in the “Optional Extension Features” section of
System Programming
.
o When you have finished, file the form with the rest of the planning forms.
Programming Instructions 5
Console Procedure
([WHQVLRQV→More→More→'LVSOD\3UHI→Dial
extension no.
→(QWHU→Select display option→
(QWHU→([LW→([LW
PC Procedure
→→→→Type extension no.→→
Select display option→→→
To Next Page
Loading...
Need help?
General
