Model 3000 Survey meter User’s Manual Section 6
Ludlum Measurements, Inc. Page 6-1 April 2021
Software
Connecting to Software
The Model 3000 software kits are sent with a standard 2-meter cable (A 5-
meter cable can be provided if requested. However, any cable longer than 2
meters may have issues with some USB-hubs/computers.)
In order to connect an instrument to the computer, please connect one end
of the USB cable to the instrument first, and then the other to the computer.
Do not connect both ends to the computer.
Please allow Windows® a moment to install the proper HID drivers for the
instrument before trying to use any software.
Note:
We recommend that you plug the USB cable into the back of
your PC (that connects to the motherboard) instead of a USB
hub.
Note:
Some parameters may only be edited in software, such as the
backlight thresholds, COUNT Display Mode, COUNT Audio
Mode, and Setup prtct.
To Next Page
Loading...
