Model 3000 Survey meter User’s Manual Section 7
Ludlum Measurements, Inc. Page 7-3 April 2021
Software Calibration Tools
Lumic Calibration software includes wizards that will assist in calibrating and
plateauing detectors. After configuring the wizard for a specific detector, the
wizard will automate much of the data collection and calculation required for
calibration.
Other Device Data
The following parameters on the instrument allow recording import
device information within the device:
Firmware Version: This is a read-only presentation of the firmware
version. With a version of 4983xnyy.zzzz, the xyy will show up on the
device screen during the power-on sequence and signifies the released
version.
Device – Model Name: This should match the model name on the
front face of the instrument.
Device – Serial Number: This should match the serial number of the
instrument.
Detector – Model: This can store the model of the detector the
instrument was calibrated for.
Detector – Serial Number: This can store the serial number of the
detector the instrument was calibrated for.
Real-time Streaming
Lumic Calibration software and this instrument have the ability to stream
data from the instrument to a computer. The data can be viewed live
inside software or can be recorded on file.
Multiple user-selected parameters can be streamed simultaneously
including:
Remote display of the screen
All unit values
Device status
Live HV current measurement
To Next Page
Loading...
