EasyManua.ls Logo

Ludlum Measurements 3000 - Cleaning and Maintenance Procedures

Ludlum Measurements 3000
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Model 3000 Survey meter Users Manual Section 8
Ludlum Measurements, Inc. Page 8-2 April 2021
symbol appears on the side panel. Be sure to take the precautions noted in
the next section whenever necessary.
The crossed-out wheelie bin symbol notifies the consumer that the
product is not to be mixed with unsorted municipal waste when discarding.
Each material must be separated. The symbol is placed on the label located
on the side panel. See section 7,Recycling, for further information.
The CE” mark is used to identify this instrument as being acceptable for
use within the European Union.
Cleaning and Maintenance Precautions
The Model 3000 may be cleaned externally with a damp cloth, using only
water as the wetting agent. Observe the following precautions when
cleaning or performing maintenance on the instrument:
1. Turn the instrument OFF and remove the batteries.
2. Allow the instrument to sit for one minute before cleaning the
exterior or accessing any internal components for maintenance.

Related product manuals