Model 3000 Survey meter User’s Manual Appendix A
Ludlum Measurements, Inc. A-3 April 2021
>2 second: If the hot-key combination is held for longer than 2 seconds, the
instrument will present the user with a PIN needed for pairing. See Figure 16.
Figure 15: Example – AuxComm Hot-key.
Caution!
The pairing PIN is only used for SLURM.
AuxComm Usage - Pairing
“Pairing” is the process to connect an instrument with a mobile device. It helps verify you
are connecting to the correct devices, as well as configures the encryption. The pairing
process should only be done when both the instrument and mobile device are ready. Ensure
the App or software is installed, and then follow these steps:
1. Open connection window in App/Software.
2. Use 2-second PIN hot-key to get PIN. This also ensures the wireless module is
turned on.
3. Select “Scan” in App/Software.
4. When instrument is found by mobile device, select device in list and then “Pair.”
5. Enter PIN in App/Software from step 2.
To Next Page
Loading...
