Ludlum Measurements 3000 - Page 67

Model 3000 Survey meter User’s Manual Appendix A
Ludlum Measurements, Inc. A-8 April 2021
If write protect is enabled, it can only be disabled by physically
connecting it to the instrument through the USB port.
AuxComm Setting - Encryption
This setting controls whether or not encryption is enabled on the AuxComm port. While
using the instrument equipped with a wireless radio, such as the Bluetooth® module, there is
the potential for external eavesdropping or attack from a third party. By utilizing an industry
standard encryption, this becomes much more difficult. Table A-6 shows valid settings.
Note:
This setting only applies to SLURM mode.
Table A-6: AuxComm Encryption
Setting
Description
0
AuxComm Encryption IS NOT used
1
AuxComm Encryption IS used
Note:
SLURM mode will still require the “pairing” sequence to connect to the
instrument.