33
colofFabb_HT
colorFabb_HT is sturdy and ready for professional-grade applications. Engineered by colorFabb
and Eastman Chemical Company, this Eastman Amphora co-polyester combines high
temperature resistance and toughness for durable 3D printed objects. This material has a
particularly elevated heat resistance of 100°C, making it a great choice for uses such as
automotive applications. colorFabb_HT adheres well to our PEI print surface.
colorFabb_HT 3D prints with little-to-no odor and is styrene-free for warp-free and
dimensionally stable parts. This makes colorFabb_HT perfect for interlocking, dimensionally
stable 3D printed objects. We strongly recommend applying PVA glue directly on the print
surface using a glue stick before printing to ensure easy part removal.
Extrusion Temperature: 275°C
PEI Print Surface Temperature: 110°C
Part Removal: 50°C
Tips: Treat PEI Print Surface with PVA Glue
Stick.
Conductive PLA
Unleash your inner electrical engineer with this exciting new premium 3D printing filament.
Since 3D printed objects have varying structures within them, the resistance across the 3D
printed object varies as well! The resistance of the 3D printed object can be different when
measured across the sides of the object than the resistance when measured from the top to
the bottom.
Use Conductive PLA filament for low-voltage printed-in-place applications such as contacts,
switches, and even internal wiring traces. This premium 3D printing filament can also interact
with some touch sensors and even touch screens. Due to the carbon powder blended into this
filament, we strongly recommend using a LulzBot Tool Head with a 0.5mm nozzle for optimal
3D printing performance.
Extrusion Temperature: 215°C
PEI Print Surface Temperature: 60°C
Part Removal: 50°C
To Next Page
Loading...
