34
copperFill
copperFill combines finely ground copper powder with premium colorFabb PLA for heavy 3D
printed objects that can be polished or oxidized to achieve your desired finish. Post-processing
will make objects printed with bronzeFill look and feel like metal! In addition, there are oxidation
techniques that can be used to give copperFill parts a unique patina, making this filament an
excellent choice for artistic and aesthetic applications. Non-processed copperFill prints have a
similar appearance to terra cotta. Due to the blended nature of this filament, we strongly
recommend using a LulzBot Tool Head with a 0.5mm nozzle for optimal 3D printing
performance.
Extrusion Temperature: 215°C
PEI Print Surface Temperature: 60°C
Part Removal: 50°C
Tips: Polish your print to expose the shine.
Tips: Abrade the print and oxidize the sur-
face for a patina.
High Temp PLA
High Temp PLA has two different finishes when 3D printed-- translucent when freshly printed,
or opaque when heat-treated! Due to the low warp when 3D printed, High Temp PLA is perfect
for objects requiring assembly, dimensional accuracy, and stability.
Anneal (heat-treat) your 3D printed objects in an oven at 60°C(140°) - 110°C(230°F) for less
than an hour, or until your printed object takes on an opaque finish. Once heat-treated, your 3D
printed part will be stiffer, stronger, and able to withstand warmer environments up to 140°C
(285°F). Do not leave printed objects unattended while in an oven.
Extrusion Temperature: 225°C
PEI Print Surface Temperature: 60°C
Part Removal: 50°C
To Next Page
Loading...
