Lumel ND20 - Page 49

49
Register of status 2 - nature of the reactive power (address 4061, R):
Bit 15 – reserved
Bit 14 – „1” – alarm indication
in phase L3 (only for alarm type:
A3non, A3nof, A3_on, A3_of
Bit 13 – „1” – alarm indication in
phase L2 (only for alarm type: A3non,
A3nof, A3_on, A3_of
Bit 12 – „1” – alarm indication in
phase L1 (only for alarm type: n-on,
n-off, on, off)
Bit 11 – „1” – capacitive 3L maximum
Bit 10 – „1” – capacitive 3L minimum
Configuration register of displayed parameters of standard values
(address 4054, R/W):
Bit 15 ...13 – reserved Bit 6 – „1” – displaying of
capacitive passive energy
Bit 12 – „1” – displaying of the date Bit 5 – „1” – displaying of inductive
passive energy
Bit 11 – „1” – displaying of the cosine j
values
Bit 4 – „1” – displaying of exported
active energy
Bit 10 – „1” – displaying of active
exported harmonic energy/ value of
current harmonic
Bit 3 – „1” – displaying of imported
active energy
Bit 9 – „1” – displaying of active
imported harmonic energy/ value of
voltage harmonic
Bit 2 – „1” – displaying of tg
Bit 8 – „1” – displaying of THD current/
value of current harmonic
Bit 1 – „1” – displaying of PF
Bit 7 – „1” – displaying of THD voltage/
value of voltage harmonic
Bit 0 – „1” – displaying of phase-to-
phase voltages
Bit 9 – „1” – capacitive 3L
Bit 8 – „1” – capacitive L3 maximum
Bit 7 – „1” – capacitive L3 minimum
Bit 6 – „1” – capacitive L3
Bit 5 – „1” – capacitive L2 maximum
Bit 4 – „1” – capacitive L2 minimum
Bit 3 – „1” – capacitive L2
Bit 2 – „1” – capacitive L1 maximum
Bit 1 – „1” – capacitive L1 minimum
Bit 0 – „1” – capacitive L1