Lumel ND20 - Page 50

50
Configuration register of displayed parameters of standard values 2
(address 4056, R/W):
Bit 15 ...6 – reserved Bit 2 – „1” – displaying of phase
active powers
Bit 5 – „1” – displaying of power ∑P,
∑Q, ∑S
Bit 1 – „1” – displaying of phase
currents
Bit 4 – „1” – displaying of phase
apparent powers
Bit 0 – „1” – displaying of phase
voltages
Bit 3 – „1” – displaying of phase
reactive powers
Configuration register of displayed parameters of average values
(address 4055, R/W):
Bit 15 ...14 – reserved Bit 5 – „1” – displaying of time
Bit 13 – „1” – displaying of mean
THD of current
Bit 4 – „1” – displaying of average
cosine j
Bit 12 – „1” – displaying of mean
THD of voltage
Bit 3 – „1” – displaying of average
active power
Bit 11 – „1” – displaying of power ∑S Bit 2 – „1” – displaying of average tg
Bit 10 – „1” – displaying of power
∑Q
Bit 1 – „1” – displaying of average PF
Bit 9 – „1” – displaying of power ∑P Bit 0 – „1” – displaying of current in
neutral wire
Bit 8 – „1” – displaying of average
current
Bit 7 – „1” – displaying of ordered
power consumption
Bit 6 – „1” – displaying of frequency