Lumens CL510 - Firmware Upgrade Instruction Manual

1
CL510 Firmware Upgrade Instruction
1. Before FW upgrade, please check the current FW version of CL510.
[Menu] [Setting] [Advanced][Firmware Version]
 If PVL1xx, please download PVL1xx version.
 If PVL2xx, please download PVL2xx version.
 If PVL3xx, please download PVL3xx version.
*[Note] Different FW code can’t be upgraded.
2. Save the proper FW file in the USB Disk.
3. Connect CL510 with a Monitor/ Projector and power on the unit.
4. Insert the USB Disk into the USB port of CL510.
5. Call the Service Menu.
Press “[Freeze]> [Delete]> [Enter]” in sequence to show the Service Menu.
Service Menu：press “ Freeze  Delete  Enter ” in sequence
1
2
3