Why is the output screen flickering on my Lumens Document Camera?
If the output screen of your Lumens Document Camera is flickering, the current frequency might be set to 60 Hz. You should change the power frequency to 50 Hz in the camera settings.
Why my computer cannot identify Lumens Document Camera DC125?
If the Lumens Document Camera DC125 cannot be identified, it may be because your operating system is outdated or incomplete. Ensure you are using Windows XP SP2 or a newer compatible version.
What to do if preview screen freezes when running Time Lapse function on Lumens DC125?
If you are experiencing a frozen preview screen while running the Time Lapse function on your Lumens Document Camera, it could be due to insufficient bandwidth when connected through a USB hub. Connect the camera directly to your computer via USB cable instead of using a USB hub.
How to fix Lumens DC125 unable to focus?
If your Lumens Document Camera is unable to focus, the document might be too close to the lens. Move the document away from the lens and then press the [AF] button on both sides of the lens.
What to do if Lumens DC125 Document Camera boot without power signal?
Ensure that the USB cable is properly connected to your Lumens Document Camera to provide power.
Why is my Lumens Document Camera output screen flickering?
If the output screen of your Lumens Document Camera is flickering, it's likely due to an incorrect power frequency setting. The default frequency is 60Hz. You should change the power frequency to 50Hz.
How to fix Lumens Document Camera when it's unable to focus?
If your Lumens Document Camera is unable to focus, the document might be too close to the lens. Move the document further away and then press the [AF] button located on both sides of the lens.
General| Sensor type | - |
|---|---|
| Image freeze | No |
| Maximum frame rate | 30 fps |
| Optical sensor size | - \ |
| Supported graphics resolutions | 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1600 x 1200 (UXGA), 1920 x 1080 (HD 1080), 2048 x 1536 (QXGA) |
| Optical zoom | 8 x |
| Shooting area (WxD) | 400 x 300 mm |
| Lamp type | LED |
| Photo effects | Mirror |
| Product color | Red |
| Cable lock slot | Yes |
| Cable lock slot type | Kensington |
| Image quality adjustment | Sharpness |
| Interface | USB 2.0 |
| Power supply type | USB |
Weight and Dimensions| Depth | 236 mm |
|---|---|
| Width | 106 mm |
| Height | 280 mm |
| Weight | 1200 g |
| Dimensions folded (WxDxH) | 236 x 106 x 280 mm |
Safety guidelines for using the document camera.
Instructions for connecting the camera to a computer.
Instructions for installing the Lumens image software.
Lists minimum system requirements for Windows and Mac.
Step-by-step guide for installing software on Windows XP/Vista.
Instructions for installing software on a MAC OS.
Details the functions of the control panel buttons.
Overview of the software interface for Windows users.
Overview of the software interface for MAC users.
Instructions for configuring firewall settings for the software.
How to configure firewall settings on MAC.
To Next Page
