English - 38
6.3.7 Setting (Advanced)
Click to open the setting menu
1. Software factory reset: Reset to the default value.
2. File Directory: File storage path.
3. Enable Audio Recorder: Activate recording function.
4. Audio source: Select audio output device.
5. Audio Compression Type: Select audio output quality.
6. Video Compression Type: Set video compression format.
7. Share Image: Share Image; this function is not supported in
Wireless mode.
8. IP address: Server IP address for image sharing.
9. Image Quality: Select image quality (high/medium/low).
10. Port: Enter port settings (8500 ~ 9000).
11. Unicast/Multicast: Select cast type.
To Next Page
Loading...
