Lumens VC-A51P

Open the browser, enter the camera IP address, enter the account
and password, you can enter the web page to set and control the
camera.
●
● Access power by using a router that supports PoE or connecting
to a hub with a network cable
※ VC-A51P/VC-A51PN supports PoE+(IEEE802.3at)
Connect the DC12V power adapter for power supply
CameraCameraCamera
CAT5e network cable CAT5e network cable
CAT
network cable
5e
Router
VS-KB30 Computer
CAT5e network cable
Router
Camera
CAT5e network cable
Account: admin
Password: 9999
* [MENU] => [Ethernet]
=> [IP Address] on the remote control
*If it is not connected to a DHCP router, the default IP address is
192.168.100.100
The IP address can be verified by clicking
*For the NDI|HX operation of VC-A51PN, please download the latest NDI software from
the NewTek website.
www.MyLumens.com
5. Camera connection description
Copyright ©2021 Lumens Digital Optics Inc. All rights reserved.
4. About the power supply
6. Web page setting