VC FW Upgrade Instruction 6
7.6 FW start updating. (around 1.5min taken)
The Percentage will be increased when it’s running.
7.7 FW upgrade finished.
The button will reverse from grey to black and the camera do the self-check
automatically.
7.8 When firmware upgrade finished, please unplug and reconnect the power cord to
restart the camera.
7.9 Go to the menu, [System]-->[Factory Reset] to reset the camera.
7.10 Go 9 Check the FW version on OSD to confirm if the FW version is correct.
To Next Page
Loading...
