Lumens VC-A70H - Chapter 1 Safety Instructions; 1 Operation; 2 Installation

VC-A70H Firmware(FW) Upgrade 5
7.4 Browse and select proper FW file.
- Uncheck the box in the front of “DSP *.bin File” and “CM *.bin File”
- Check the box in the front of “Motor *.bin File”
- Click [Browse] and select the FW file
7.5 Select proper [Com Port] and set the [Baud Rate] as [9600], and then press
[DownLoad AP] to start.